Imporant!
Before you start the update, make a copy of the *.DDD files which are in the device in the following locations:
- PNSTACHO -> CARD;
- and PNSTACHO -> TACHO.
To update your system, perform the following actions:
- Connect the TachoReader Combo Plus device to the computer;
- Wait while Windows installs the drivers for the updated device;
- Download and save the latest version of the software for the TachoReader Combo Plus device (from the website: Device Software);
Note!
Due to technological development, TachoReader Combo Plus devices can have different types of components.
Before you start updating, check the serial number located on the bottom of the device.
Before you start updating, check the serial number located on the bottom of the device.
- Download the TachoReader Combo 1.x.x (.exe) version for devices whose serial number ends with the letter "A", "B" or "AT".
- Download the TachoReader Combo 5.x.x (.exe) version for devices whose serial number ends with a digit.
4. Unzip the downloaded file to your chosen location;
5. . Start the TachoReader Combo Plus update program and follow the displayed instructions;
Important!
If the update process stops at 12%, please close the update process via Windows Task Manager and run the update again.
Note
During the update procedure, a message about copying *.DDD files will appear. Because the files have already been copied before updating the device (see the warning at the beginning of the instructions), copy the files, e.g. to the C drive or directly to the dashboard.
6. After updating, start the kontaktor.exe or TachoReaderConfigurator.exe application on the device, and then click the “Save configuration” button.